Official ORSC GMRS Frequencies

[Twilliamson]

Not everyone will be using the same equipment or have the ability to program channels in the field into their radios, Below you will find our official "Codeplug" of channels the majority of members will be using during events, such as OSCAR, The Clemson 4 Wheel Poker run, Parades, etc. The frequencies below are a mix of License required GMRS and FRS. It is your responsibility to understand what frequencies, power levels and bandwidth you are allowed to operate on. This is just a recommendation. I would also recommend anyone that is using a generic GMRS Radio to print this table out and keep a copy in your rig for trail reference.

 

[Twilliamson]

Reserved for Code Plugs

TYT - UV 380/390 - https://drive.google.com/open?id=145nlh3kEipLTeqU83rDvN_F3IPeDZBz1

Kenwood - TK-880 - https://drive.google.com/open?id=1UguvqF4aCdLpzQgFaFRDehGUGPHvgKGx

Anytone AT-778UV (CHIRP) - https://drive.google.com/file/d/1myvAup8ZwmlL3tx0p4-0nLeCqNC6WaYA

 

[97TJGUZZY]

what units will you have the ability to program at OSCAR8?

 

[Twilliamson]

what units will you have the ability to program at OSCAR8?

Should have the ability to program just about anything.

 

[TCBronco]

So 123 Hz is the CTCSS tone we'll be using for everything? Don't want to get myself in a situation where I can't hear anyone haha

 

[Twilliamson]

Yes, ctcss or pl will always be 123.0 to can opt to only set transmit, but you might hear other traffic.

 

[Fenrir]

mmmm that sweet windows xp screen saver

 

[Twilliamson]

mmmm that sweet windows xp screen saver

I keep a windows xp VM on a flash drive for programming old 32 bit only radios... I actually have a 486 laptop that i still use for some of the older motorola radios.

 

[97TJGUZZY]

bumping this back up, i know there were some people asking about this at OSCAR. If you need the frequencies they are listed at the beginning of this thread.

 

[Twilliamson]

Also might have something new in the works for use around the midlands area.....but more on that later.

 

[matth_85]

I need someone to program my Rugged Radio to talk shit to you guys. Todd and I just rode around Saturday for 4 hours before anyone woke up pounding dirt roads...

 

[97TJGUZZY]

These are the programming codes we have been talking about at the MCJ meetings lately.

 

[Ghost]

Looks like a good start. Are the FRS channels the handheld radios you find at Walmart and other stores?

 

[97TJGUZZY]

Looks like a good start. Are the FRS channels the handheld radios you find at Walmart and other stores?

yes, I use those on my Midland Handhelds https://a.co/d/bVvJAtx

 

[Ghost]

I need to get a chart like that with more channels to save to my phone. I'm always trying to google that info at the trail head.

 

[97TJGUZZY]

Also, we may need to update that chart so that we can list the Midland channel and privacy codes. we list the channel 18, but there are privacy codes that further limit it that aren't listed.