I have an 84 and older front housing (short lower truss) that I was saving for a rainy day or mud truck project one day down the road that will probably never take place. It's currently torn apart, so I am just gonna sell in pieces.
I have 4 stock knuckles 2 drivers and 2 pass sides. Two are off of a FJ-62. They look a little different but are fine for a straight axle truck.
$50 ea.
1 long side axle shaft with birf $75
1 short side axle shaft with birf $75
2 ASIN hubs $50ea.
1 4:10 third $50
I have 5 spindles $50ea for the 4 good ones. I have one thats rusty and will take $25 for it (can be cleaned and will be fine).
I have straight axle hub assemblies with rotors that should be fine $50ea.
I have calipers that were good when pulled but probably would need rebuilt since they have been out a long time $10ea.
Bare housing in good shape, never wheeled on. Has tie rod with new TRE's. $50
I also have a 85 housing that has the cover busted and is bent a little on the long side. Does have TG LG diff armor and truss that can be salvaged and knucle balls are good. $30
I also have any misc. bolts/conewashers/etc. for the axle that I will sell if someone needs them or just throw them in the bolt bin if not.
Will ship any of the smaller parts in whatever flat rate box they will fit in. Or the cheapest way.
Call/Txt/PM 864-871-0444
All parts located in Hodges, SC. Can provide pics if needed.
I have 4 stock knuckles 2 drivers and 2 pass sides. Two are off of a FJ-62. They look a little different but are fine for a straight axle truck.
$50 ea.
1 long side axle shaft with birf $75
1 short side axle shaft with birf $75
2 ASIN hubs $50ea.
1 4:10 third $50
I have 5 spindles $50ea for the 4 good ones. I have one thats rusty and will take $25 for it (can be cleaned and will be fine).
I have straight axle hub assemblies with rotors that should be fine $50ea.
I have calipers that were good when pulled but probably would need rebuilt since they have been out a long time $10ea.
Bare housing in good shape, never wheeled on. Has tie rod with new TRE's. $50
I also have a 85 housing that has the cover busted and is bent a little on the long side. Does have TG LG diff armor and truss that can be salvaged and knucle balls are good. $30
I also have any misc. bolts/conewashers/etc. for the axle that I will sell if someone needs them or just throw them in the bolt bin if not.
Will ship any of the smaller parts in whatever flat rate box they will fit in. Or the cheapest way.
Call/Txt/PM 864-871-0444
All parts located in Hodges, SC. Can provide pics if needed.